|
| MOQ: | 1 |
| Price: | Negotiable |
| Standard Packaging: | Carton |
| Delivery Period: | 15 Days |
| Payment Method: | T/T |
| Supply Capacity: | 20 Sets Per Month |
IEC 62560 Clause 15 Circuit Of Figure 8 For Non-Dimmable Lamps For Testing self-ballasted Lamp
Product information:
The test circuit for testing a non-dimmable lamp is manufactured according to IEC62560 clause 15 figure 8.
Standard description:
15.Abnormal operation
Self-ballasted lamps shall not create hazard under abnormal operating conditions.
Self-ballasted lamps shall be constructed so that as a result of abnormal or careless operation, the risk of fire and mechanical damage impairing safety of protection against electric shock is obviated.
Appling non-dimmable self-ballasted lamps on a diameter or an electronic switch is to be tested as a possible case of abnormal operation.
Test procedure:
Test non-dimmable lamp in test circuit shown in figure 8.
Determine R1 and S1 setting at which the maximum I r.m.s occurs.
Test at this situation, and if the lamp passively fails within 60 min, repeat the test at 10% lower I r.m.s. The lower I r.m.s shall be set in the decreasing potentiometer resistance direction.
Repeat these procedures until stable operation is achieved for minimum 60 min.
Video
|
|
| MOQ: | 1 |
| Price: | Negotiable |
| Standard Packaging: | Carton |
| Delivery Period: | 15 Days |
| Payment Method: | T/T |
| Supply Capacity: | 20 Sets Per Month |
IEC 62560 Clause 15 Circuit Of Figure 8 For Non-Dimmable Lamps For Testing self-ballasted Lamp
Product information:
The test circuit for testing a non-dimmable lamp is manufactured according to IEC62560 clause 15 figure 8.
Standard description:
15.Abnormal operation
Self-ballasted lamps shall not create hazard under abnormal operating conditions.
Self-ballasted lamps shall be constructed so that as a result of abnormal or careless operation, the risk of fire and mechanical damage impairing safety of protection against electric shock is obviated.
Appling non-dimmable self-ballasted lamps on a diameter or an electronic switch is to be tested as a possible case of abnormal operation.
Test procedure:
Test non-dimmable lamp in test circuit shown in figure 8.
Determine R1 and S1 setting at which the maximum I r.m.s occurs.
Test at this situation, and if the lamp passively fails within 60 min, repeat the test at 10% lower I r.m.s. The lower I r.m.s shall be set in the decreasing potentiometer resistance direction.
Repeat these procedures until stable operation is achieved for minimum 60 min.
