|
| MOQ: | 1 |
| Price: | Customized |
| Standard Packaging: | Plywood Case |
| Delivery Period: | 30 Days |
| Payment Method: | T/T |
| Supply Capacity: | 10 sets per month |
IP5X IP6X Sand And Dust Test Chamber 1000L With PLC Control Figure IEC 60529
Product information:
This equipment is suitable for testing electrical and electronic products, automobile and motorcycle parts, and seals to prevent sand and dust from entering the seals and shells in a sand and dust environment. It is used to test the performance of electronic and electrical products, automobile and motorcycle parts, and seals in the use, storage, and transportation of sand and dust environments. The purpose of the test is to determine the possible harmful effects of particles carried by airflow on electrical products. The test can be used to simulate open sand and dust air environment conditions induced by natural environment or artificial disturbances such as vehicle movement.
The sand and dust test chamber is designed and manufactured according to IEC60529 Fig 2 IP5X and IP6X, IEC60598-1-2008, IEC60335-1 Clause 22.1 and etc.
Function parameters:
| Model | SN441 | |
| Working size(mm) | L1000*W1000*H1000 | |
| Outer size (mm) | L1450*W1250*H2200 | |
| Main technical parameters | Baking dust temperature range | RT+10℃～60℃ |
| Fine dust | 75um or less | |
| Coarse dust | 150um or less | |
| Air flow velocity | Not greater than 2m/s | |
| Dust concentration | 2kg/m³ | |
| Talcum powder dosage | 2～5kgm³ | |
| Dust blowing method | From top to bottom | |
| Air flow meter | 1-20L/M | |
| Negative pressure difference range | -10~0kpa can be set and adjustable. Air pressure can be freely set at -2kPa, -5kPa and -10kPa | |
| Metal mesh diameter | 50um | |
| Nominal spacing between lines | 75um or less than 150um | |
| Shock time | 1s～99h (adjustable) | |
| Test time timing | 1s～99h (adjustable) | |
| Dust blowing control cycle | 1s～99h (adjustable) | |
| Vacuum time | 1s～99h (adjustable) | |
| Controller control function |
A. blowing dust time (stop, blowing) can be adjusted B. Cycle: arbitrary adjustable C. Preset test time: 0.1H-9999.9H arbitrary adjustable D. Power: On-off- On |
|
| Circulation fan | Closed alloy low-noise motor, multi-blade centrifugal fan | |
| Load bearing | 20kg | |
| Observation window | 1 PC | |
| Lighting lamp | 1 PC | |
| Control system sample power socket | Dust-proof socket AC220V 16A | |
| Control system | PLC controller + touch screen | |
| Vacuum system | Pressure regulating valve, nozzle, pressure regulating three-piece set, connecting pipe, vacuum pump | |
| Dust heating system | Stainless steel mica sheet heating sleeve | |
| Inner chamber material | SUS201 stainless steel mirror panel | |
| Outer chamber material | A3 iron plate with electrostatic spraying treatment | |
| Structure | It consists of test chamber, dust suction port, circulating dust blowing device, vacuum system, flow valve, heating system, protective screen, etc. | |
| Power supply | AC380V three-phase five-wire, 50Hz. Make a separate 32A air switch. The air switch should have terminal blocks. The power cord must be ≥4 square meters. | |
| Environmental conditions | Temperature (23±5)℃; relative humidity 25%～70%RH; atmospheric pressure 86～106kPa | |
| Power | 3KW (no load) | |
| Safety protection system | Phase sequence protection, leakage protection | |
Product main configuration:
| Device Name | Dust and Sand Test Chamber | ||
|
Main configuration |
Cabinet | Enclosure material | A3 plate electrostatic spraying |
| Inner material | SUS304B Stainless steel | ||
| Lead hole | The sample can be external power supply through this hole | ||
| Observation window | large observation window in the middle of the door | ||
| Electrical control system | Controller |
PLC Control: A. blowing dust time (stop, blowing) can be adjusted B. Cycle: arbitrary adjustable C. Preset test time: 0.1H-9999.9H arbitrary adjustable D. Power: On-off- On E. There are accumulating function and power-off protection function |
|
| Vacuum system | Equipped with a vacuum pump, pressure gauge, air filter, pressure regulator, connecting pipe | ||
|
Security Protection Device |
Power overload, short-circuit protection | ||
| Ground Protection | |||
| Voltage Protection | |||
| Motor phase loss protection | |||
| Alarm beep prompt | |||
| Power Supply | Three phase 380V, 50Hz,3KW | ||
| Accessories |
1 pc of Sieve 5 kgs of talc 1 pc of brash 1 pair of window scraper |
||
|
|
| MOQ: | 1 |
| Price: | Customized |
| Standard Packaging: | Plywood Case |
| Delivery Period: | 30 Days |
| Payment Method: | T/T |
| Supply Capacity: | 10 sets per month |
IP5X IP6X Sand And Dust Test Chamber 1000L With PLC Control Figure IEC 60529
Product information:
This equipment is suitable for testing electrical and electronic products, automobile and motorcycle parts, and seals to prevent sand and dust from entering the seals and shells in a sand and dust environment. It is used to test the performance of electronic and electrical products, automobile and motorcycle parts, and seals in the use, storage, and transportation of sand and dust environments. The purpose of the test is to determine the possible harmful effects of particles carried by airflow on electrical products. The test can be used to simulate open sand and dust air environment conditions induced by natural environment or artificial disturbances such as vehicle movement.
The sand and dust test chamber is designed and manufactured according to IEC60529 Fig 2 IP5X and IP6X, IEC60598-1-2008, IEC60335-1 Clause 22.1 and etc.
Function parameters:
| Model | SN441 | |
| Working size(mm) | L1000*W1000*H1000 | |
| Outer size (mm) | L1450*W1250*H2200 | |
| Main technical parameters | Baking dust temperature range | RT+10℃～60℃ |
| Fine dust | 75um or less | |
| Coarse dust | 150um or less | |
| Air flow velocity | Not greater than 2m/s | |
| Dust concentration | 2kg/m³ | |
| Talcum powder dosage | 2～5kgm³ | |
| Dust blowing method | From top to bottom | |
| Air flow meter | 1-20L/M | |
| Negative pressure difference range | -10~0kpa can be set and adjustable. Air pressure can be freely set at -2kPa, -5kPa and -10kPa | |
| Metal mesh diameter | 50um | |
| Nominal spacing between lines | 75um or less than 150um | |
| Shock time | 1s～99h (adjustable) | |
| Test time timing | 1s～99h (adjustable) | |
| Dust blowing control cycle | 1s～99h (adjustable) | |
| Vacuum time | 1s～99h (adjustable) | |
| Controller control function |
A. blowing dust time (stop, blowing) can be adjusted B. Cycle: arbitrary adjustable C. Preset test time: 0.1H-9999.9H arbitrary adjustable D. Power: On-off- On |
|
| Circulation fan | Closed alloy low-noise motor, multi-blade centrifugal fan | |
| Load bearing | 20kg | |
| Observation window | 1 PC | |
| Lighting lamp | 1 PC | |
| Control system sample power socket | Dust-proof socket AC220V 16A | |
| Control system | PLC controller + touch screen | |
| Vacuum system | Pressure regulating valve, nozzle, pressure regulating three-piece set, connecting pipe, vacuum pump | |
| Dust heating system | Stainless steel mica sheet heating sleeve | |
| Inner chamber material | SUS201 stainless steel mirror panel | |
| Outer chamber material | A3 iron plate with electrostatic spraying treatment | |
| Structure | It consists of test chamber, dust suction port, circulating dust blowing device, vacuum system, flow valve, heating system, protective screen, etc. | |
| Power supply | AC380V three-phase five-wire, 50Hz. Make a separate 32A air switch. The air switch should have terminal blocks. The power cord must be ≥4 square meters. | |
| Environmental conditions | Temperature (23±5)℃; relative humidity 25%～70%RH; atmospheric pressure 86～106kPa | |
| Power | 3KW (no load) | |
| Safety protection system | Phase sequence protection, leakage protection | |
Product main configuration:
| Device Name | Dust and Sand Test Chamber | ||
|
Main configuration |
Cabinet | Enclosure material | A3 plate electrostatic spraying |
| Inner material | SUS304B Stainless steel | ||
| Lead hole | The sample can be external power supply through this hole | ||
| Observation window | large observation window in the middle of the door | ||
| Electrical control system | Controller |
PLC Control: A. blowing dust time (stop, blowing) can be adjusted B. Cycle: arbitrary adjustable C. Preset test time: 0.1H-9999.9H arbitrary adjustable D. Power: On-off- On E. There are accumulating function and power-off protection function |
|
| Vacuum system | Equipped with a vacuum pump, pressure gauge, air filter, pressure regulator, connecting pipe | ||
|
Security Protection Device |
Power overload, short-circuit protection | ||
| Ground Protection | |||
| Voltage Protection | |||
| Motor phase loss protection | |||
| Alarm beep prompt | |||
| Power Supply | Three phase 380V, 50Hz,3KW | ||
| Accessories |
1 pc of Sieve 5 kgs of talc 1 pc of brash 1 pair of window scraper |
||
