|
| MOQ: | 1 |
| Price: | Customized |
| Standard Packaging: | Plywood Case |
| Delivery Period: | 30 Days |
| Payment Method: | T/T |
| Supply Capacity: | 10 sets per month |
High-Performance Thermal Shock Test Chamber -40℃ To 150℃ Range IEC60068-2
Product information:
This thermal shock test chamber meets the requirements of IEC60068-2-1, IEC60068-2-2, IEC60068-2-30 and IEC60068-2-78, and required by many standards.
It is used to verify whether there is a bad influence on the product due to rapid changes in high and low temperature in such a manner that the sample does not move.
Technical parameter:
| Product Name | Thermal Shock Test Chamber |
| Product Model | SN887B-100L |
| Volume | 100L |
| Internal Dimensions | W500*H500mm*D400mm |
| External Dimensions | W1420mm*H1888mm*D1590mm |
| Weight | Approximately 1200kg |
| High-Temperature Range | +60℃ ~ +180℃ |
| Heating Time | +20℃ ~ +180℃ ≤ 25 min Note: The heating time refers to the performance when the high-temperature chamber operates independently. |
| Low-Temperature Range | -10℃ ~ -70℃ |
| Cooling Time | +20℃ ~ -70℃ ≤ 60 min Note: The cooling time refers to the performance when the low-temperature chamber operates independently. |
| Temperature Shock Range | -40℃~150℃ |
| Temperature Fluctuation | ±0.5℃ |
| Temperature Deviation | ±2.0℃ |
| Temperature Recovery Time | ≤5min |
| Temperature Transition Time | ≤10sec |
| Recovery Conditions |
High-temperature exposure: +85℃ / 30 min → Ambient temperature exposure → Low-temperature exposure: -40℃ / 30 min Maximum Sample Weight: 20 KG |
Structural Features:
| Standard Configuration of the Test Chamber |
Flush-mounted handle. Door Hinges: Imported SUS #304 stainless steel hinges. Shelves: Two SUS #304 stainless steel grille-type shelves, with a maximum load of 20KG per layer. Adjustable Shelf Tracks: Two sets with 40mm adjustable spacing. Lead-through Port: One φ50mm port at the top of the chamber. |
| Chamber Door |
Single Door: Opens outward, hinges on the left, handle on the right (when facing the front of the chamber). Equipped with an observation window (W300 x H450mm) made of anti-fog tempered glass and Philips lighting. Anti-condensation Heating Device: For window and door frames. Additional Tempered Glass: Allows clear observation of tests inside the chamber. |
| Control Panel | 7-inch display screen, over-temperature protection settings, SD card slot, and RS232 communication interface. |
| Mechanical Room | Refrigeration unit, compressor water tray, and pressure relief device. |
| Power Distribution Control Cabinet | Power distribution board, cooling fan, and main power switch. |
| Heater |
Type: Finned tubular stainless steel electric heater. Heating Control Method: SSR (Solid State Relay) with zero-crossing point and periodic pulse width modulation. Heating Power for Low-Temperature Zone: Approximately 6KW. Heating Power for High-Temperature Zone: Approximately 9KW. |
| Power Cable Port and Drain Port | Located at the back of the chamber. |
| Electrical Controller Model | Custom seven-inch controller. |
| Operating Model | Programmable operation / Chinese and English menu, touchscreen input. |
| Setting Range |
High-temperature chamber preheating upper limit: +210℃ Low-temperature chamber pre-cooling lower limit: -80℃ |
| Controller Specifications |
Accuracy: Temperature ±0.1℃ + 1 digit Resolution: Temperature ±0.01℃ Temperature slope: 0.1 ~ 9.9 (adjustable). Includes upper and lower limit standby and alarm functions. Temperature input signal: T-type armored thermocouple sensor. 6 sets of P.I.D. control parameters with automatic P.I.D. calculation |
|
|
| MOQ: | 1 |
| Price: | Customized |
| Standard Packaging: | Plywood Case |
| Delivery Period: | 30 Days |
| Payment Method: | T/T |
| Supply Capacity: | 10 sets per month |
High-Performance Thermal Shock Test Chamber -40℃ To 150℃ Range IEC60068-2
Product information:
This thermal shock test chamber meets the requirements of IEC60068-2-1, IEC60068-2-2, IEC60068-2-30 and IEC60068-2-78, and required by many standards.
It is used to verify whether there is a bad influence on the product due to rapid changes in high and low temperature in such a manner that the sample does not move.
Technical parameter:
| Product Name | Thermal Shock Test Chamber |
| Product Model | SN887B-100L |
| Volume | 100L |
| Internal Dimensions | W500*H500mm*D400mm |
| External Dimensions | W1420mm*H1888mm*D1590mm |
| Weight | Approximately 1200kg |
| High-Temperature Range | +60℃ ~ +180℃ |
| Heating Time | +20℃ ~ +180℃ ≤ 25 min Note: The heating time refers to the performance when the high-temperature chamber operates independently. |
| Low-Temperature Range | -10℃ ~ -70℃ |
| Cooling Time | +20℃ ~ -70℃ ≤ 60 min Note: The cooling time refers to the performance when the low-temperature chamber operates independently. |
| Temperature Shock Range | -40℃~150℃ |
| Temperature Fluctuation | ±0.5℃ |
| Temperature Deviation | ±2.0℃ |
| Temperature Recovery Time | ≤5min |
| Temperature Transition Time | ≤10sec |
| Recovery Conditions |
High-temperature exposure: +85℃ / 30 min → Ambient temperature exposure → Low-temperature exposure: -40℃ / 30 min Maximum Sample Weight: 20 KG |
Structural Features:
| Standard Configuration of the Test Chamber |
Flush-mounted handle. Door Hinges: Imported SUS #304 stainless steel hinges. Shelves: Two SUS #304 stainless steel grille-type shelves, with a maximum load of 20KG per layer. Adjustable Shelf Tracks: Two sets with 40mm adjustable spacing. Lead-through Port: One φ50mm port at the top of the chamber. |
| Chamber Door |
Single Door: Opens outward, hinges on the left, handle on the right (when facing the front of the chamber). Equipped with an observation window (W300 x H450mm) made of anti-fog tempered glass and Philips lighting. Anti-condensation Heating Device: For window and door frames. Additional Tempered Glass: Allows clear observation of tests inside the chamber. |
| Control Panel | 7-inch display screen, over-temperature protection settings, SD card slot, and RS232 communication interface. |
| Mechanical Room | Refrigeration unit, compressor water tray, and pressure relief device. |
| Power Distribution Control Cabinet | Power distribution board, cooling fan, and main power switch. |
| Heater |
Type: Finned tubular stainless steel electric heater. Heating Control Method: SSR (Solid State Relay) with zero-crossing point and periodic pulse width modulation. Heating Power for Low-Temperature Zone: Approximately 6KW. Heating Power for High-Temperature Zone: Approximately 9KW. |
| Power Cable Port and Drain Port | Located at the back of the chamber. |
| Electrical Controller Model | Custom seven-inch controller. |
| Operating Model | Programmable operation / Chinese and English menu, touchscreen input. |
| Setting Range |
High-temperature chamber preheating upper limit: +210℃ Low-temperature chamber pre-cooling lower limit: -80℃ |
| Controller Specifications |
Accuracy: Temperature ±0.1℃ + 1 digit Resolution: Temperature ±0.01℃ Temperature slope: 0.1 ~ 9.9 (adjustable). Includes upper and lower limit standby and alarm functions. Temperature input signal: T-type armored thermocouple sensor. 6 sets of P.I.D. control parameters with automatic P.I.D. calculation |
