|
| MOQ: | 1 |
| Price: | Customized |
| Standard Packaging: | Plywood Case |
| Delivery Period: | 30 Days |
| Payment Method: | T/T |
| Supply Capacity: | 10 Sets Per Month |
IEC 60598-1 IPX3~7 Waterproof Degree Test System Oscillating Tubes Test Immersion Chamber
Product Overview:
This IPX3~7 waterproof test system conforms to IEC 60529:2013, and required by IEC60335-1 clause 15, etc. This system includes following:
| No. | Name | IP Code | Remark |
| 1 | Oscillating Tubes Test Apparatus | IPX3~4 |
Oscillating Tubes: R400mm, R600mm, R800mm Controlled by Control Cabinet on IPX7 |
| 2 | Integrated Immersion Chamber for IPX7 & Water Supply Tank and Control Cabinet for IPX3~7 | IPX7 |
Inner chamber size: 650mm*600mm*1500mm Controlled by Control Cabinet on IPX7 |
| 3 | Turntable & Nozzles Support | Accessory for IPX3~IPX6 |
φ600mm Controlled by Control Cabinet on IPX7 |
Technical parameters:
1. Oscillating Tubes Test Apparatus
| No. | Item | parameters |
| 1 | Water supply |
Water flow rate＞10L/min±5% clean water without inclusion. This device is equipped with clean water filtration unit |
| 2 | The size of the oscillating tube | Standard coming with R400mm, R600mm, R800mm oscillating tubes, made of stainless steel |
| 3 | Needle hole | Φ0.4mm |
| 4 | Included angle of two holes | IPX3:120°; IPX4:180° |
| 5 | Oscillating tube swing angle |
Max. ±175° can be preset (Note: standard requires IPX3:120°; IPX4:360°, but due to there is turntable under oscillating tube during test, so 360° cannot achieved during actual testing, if without turntable, then 360° can be achieved) |
| 6 | Raining speed |
IPX3: 4s/time (2×120°); IPX4: 12s/time (2×360°); |
| 7 | Water flow | Can be set according to the size of the pendulum and the number of the pin holes (0.07 L/min per hole) |
| 8 | Testing time | 0.01S～99 hours 59mins,can be preset |
| 9 | Pressure gauge | 0~0.25MPa |
| 10 | Site requirements |
Dedicated IP waterproof test room, the ground should be flat with illumination 10A waterproof leakage switch (or socket) used for equipment. With good function of inflow and drainage. Ground installation |
| 11 | The area | According to the oscillating tube chose |
2. Integrated Immersion Chamber & Water Supply Tank & Control Cabinet
1. The smart water supply and control system is applicable to:
(a) Water supply for IPX3~IPX6 waterproof test
(b) IPX7 water immersion test
(c) Automatic control for the whole waterproof equipment
3. Water supply control process: After user preset the water temperature value, water flow value and water pressure value on the touch screen, the temperature control system, electronic meters or digital pressure gauge real-time monitor the current values, read the values into PLC through the data conversion, then automatically adjust the rotational speed of pump through the frequency converter.
4. Water tempreture control: PID system automatically control and detect water tempreture, range: room temperature ~ 65℃ (±3℃).
5. There are large flow and small flow two ways water supply.
6. Large flow water supply:
(a) It is applicable to IPX5~IPX6 strong water spray test
(b) Flow range: 10~100L/min
(c) Flow accuracy: ±0.5L/min
(d) Flowmeter: turbine flowmeter
(e) Water pump: stainless steel centrifugal pump
7. Small flow water supply:
(a) It is applicable to IPX3~IPX4 waterproof test
(b) Flow range: 1~10L/min
(c) Flow accuracy: ±0.5L/min
Flowmeter: turbine flowmeter
(d) Water pump: stainless steel centrifugal pump
8. Water storage tank:
(a) It is applicable to water storage of IPX5~IPX6 strong water spray test, water injection of IPX7 immersion
(b) Volume: Approx. 500L
(c) Dimension: W600mmXD650mmXH1500mm
(d) Observation window: toughened glass window
(e) Observation window dimension: W200mmXH1250mm
(f) Depth gauge: stainless steel
(g) Depth gauge height: 1200mm, accuracy1mm
(h) Liquid level control: float switch + overflow pipe
9. IPX7 immersion automatic lift bracket
(a) Lifting distance: 0~1200mm
(b) Bracket dimension: L400mmXW400mm
(c) Bracket load weight: 100Kg
10. Control Cabinet:
(a) Flow detection: flow signal feedback through electronic flowmeter
(b) Flow setting: set on touch screen
(c) Temperature detection: PID
(d) Controller: Mitsubishi PLC
(e) Friendly interface: 7 inch, color touch screen
(f) Control Function: constant temperature water supply, constant flow water supply, constant pressure water supply, and test time control.
(g) Protection function: leakage protection, overload protection, short circuit protection
12. Filter: stainless steel shell, fine filter core
13. Body material: industrial aluminum alloy
14. Outer dimension: 1400mmX750mmX1600mm
15. Power supply: Three phases AC 380V, 50Hz
3.Turntable & Nozzles Support
| Turntable diameter | Ø600mm |
| Turntable speed | 1rpm |
| Tiltable angle | Can achieve 0° and 15° |
| Test angle of rotation | 90° , continuous rotation |
| Body material | Industrial aluminum alloy |
| Dimensions (LxDxH) | 800X800X250mm |
| Nozzles support | For fix the Ipx3/4 and IPX5/6 nozzles, please note that the nozzles are prepared by customer according to customer’s requirements. |
| Aluminum base with casters | |
| Reversible control, rotational movement control by the control cabinet | |
Video
Video
Video
Video
Video
|
|
| MOQ: | 1 |
| Price: | Customized |
| Standard Packaging: | Plywood Case |
| Delivery Period: | 30 Days |
| Payment Method: | T/T |
| Supply Capacity: | 10 Sets Per Month |
IEC 60598-1 IPX3~7 Waterproof Degree Test System Oscillating Tubes Test Immersion Chamber
Product Overview:
This IPX3~7 waterproof test system conforms to IEC 60529:2013, and required by IEC60335-1 clause 15, etc. This system includes following:
| No. | Name | IP Code | Remark |
| 1 | Oscillating Tubes Test Apparatus | IPX3~4 |
Oscillating Tubes: R400mm, R600mm, R800mm Controlled by Control Cabinet on IPX7 |
| 2 | Integrated Immersion Chamber for IPX7 & Water Supply Tank and Control Cabinet for IPX3~7 | IPX7 |
Inner chamber size: 650mm*600mm*1500mm Controlled by Control Cabinet on IPX7 |
| 3 | Turntable & Nozzles Support | Accessory for IPX3~IPX6 |
φ600mm Controlled by Control Cabinet on IPX7 |
Technical parameters:
1. Oscillating Tubes Test Apparatus
| No. | Item | parameters |
| 1 | Water supply |
Water flow rate＞10L/min±5% clean water without inclusion. This device is equipped with clean water filtration unit |
| 2 | The size of the oscillating tube | Standard coming with R400mm, R600mm, R800mm oscillating tubes, made of stainless steel |
| 3 | Needle hole | Φ0.4mm |
| 4 | Included angle of two holes | IPX3:120°; IPX4:180° |
| 5 | Oscillating tube swing angle |
Max. ±175° can be preset (Note: standard requires IPX3:120°; IPX4:360°, but due to there is turntable under oscillating tube during test, so 360° cannot achieved during actual testing, if without turntable, then 360° can be achieved) |
| 6 | Raining speed |
IPX3: 4s/time (2×120°); IPX4: 12s/time (2×360°); |
| 7 | Water flow | Can be set according to the size of the pendulum and the number of the pin holes (0.07 L/min per hole) |
| 8 | Testing time | 0.01S～99 hours 59mins,can be preset |
| 9 | Pressure gauge | 0~0.25MPa |
| 10 | Site requirements |
Dedicated IP waterproof test room, the ground should be flat with illumination 10A waterproof leakage switch (or socket) used for equipment. With good function of inflow and drainage. Ground installation |
| 11 | The area | According to the oscillating tube chose |
2. Integrated Immersion Chamber & Water Supply Tank & Control Cabinet
1. The smart water supply and control system is applicable to:
(a) Water supply for IPX3~IPX6 waterproof test
(b) IPX7 water immersion test
(c) Automatic control for the whole waterproof equipment
3. Water supply control process: After user preset the water temperature value, water flow value and water pressure value on the touch screen, the temperature control system, electronic meters or digital pressure gauge real-time monitor the current values, read the values into PLC through the data conversion, then automatically adjust the rotational speed of pump through the frequency converter.
4. Water tempreture control: PID system automatically control and detect water tempreture, range: room temperature ~ 65℃ (±3℃).
5. There are large flow and small flow two ways water supply.
6. Large flow water supply:
(a) It is applicable to IPX5~IPX6 strong water spray test
(b) Flow range: 10~100L/min
(c) Flow accuracy: ±0.5L/min
(d) Flowmeter: turbine flowmeter
(e) Water pump: stainless steel centrifugal pump
7. Small flow water supply:
(a) It is applicable to IPX3~IPX4 waterproof test
(b) Flow range: 1~10L/min
(c) Flow accuracy: ±0.5L/min
Flowmeter: turbine flowmeter
(d) Water pump: stainless steel centrifugal pump
8. Water storage tank:
(a) It is applicable to water storage of IPX5~IPX6 strong water spray test, water injection of IPX7 immersion
(b) Volume: Approx. 500L
(c) Dimension: W600mmXD650mmXH1500mm
(d) Observation window: toughened glass window
(e) Observation window dimension: W200mmXH1250mm
(f) Depth gauge: stainless steel
(g) Depth gauge height: 1200mm, accuracy1mm
(h) Liquid level control: float switch + overflow pipe
9. IPX7 immersion automatic lift bracket
(a) Lifting distance: 0~1200mm
(b) Bracket dimension: L400mmXW400mm
(c) Bracket load weight: 100Kg
10. Control Cabinet:
(a) Flow detection: flow signal feedback through electronic flowmeter
(b) Flow setting: set on touch screen
(c) Temperature detection: PID
(d) Controller: Mitsubishi PLC
(e) Friendly interface: 7 inch, color touch screen
(f) Control Function: constant temperature water supply, constant flow water supply, constant pressure water supply, and test time control.
(g) Protection function: leakage protection, overload protection, short circuit protection
12. Filter: stainless steel shell, fine filter core
13. Body material: industrial aluminum alloy
14. Outer dimension: 1400mmX750mmX1600mm
15. Power supply: Three phases AC 380V, 50Hz
3.Turntable & Nozzles Support
| Turntable diameter | Ø600mm |
| Turntable speed | 1rpm |
| Tiltable angle | Can achieve 0° and 15° |
| Test angle of rotation | 90° , continuous rotation |
| Body material | Industrial aluminum alloy |
| Dimensions (LxDxH) | 800X800X250mm |
| Nozzles support | For fix the Ipx3/4 and IPX5/6 nozzles, please note that the nozzles are prepared by customer according to customer’s requirements. |
| Aluminum base with casters | |
| Reversible control, rotational movement control by the control cabinet | |
