|
| MOQ: | 1 |
| Price: | Customized |
| Standard Packaging: | Plywood Case |
| Delivery Period: | 30 Days |
| Payment Method: | T/T |
| Supply Capacity: | 10 Sets Per Month |
Open-Type IPX9K High Pressure Water Resistance Test System Ingress Protection Testing
Product information:
The main specimens of this equipment: passenger cars, buses, lamps, motorcycles and other vehicles and their parts.
This equipment can simulate the cleaning process conditions of high pressure/steam jet cleaning to test the physical and other related properties of the specimens.
After the test, it can be judged whether the performance of the product meets the requirements. It is convenient for product design, improvement, verification and factory inspection.
This equipment complies with IEC60529, DIN40050-9, ISO20653 and other standards.
The test function (IPX9K) is used for the inspection of electrical products with enclosure protection level IEC (IP supplement code enhanced test). It is manufactured according to the relevant specifications in the DIN40050 standard. This waterproof tester can provide test conditions simulating natural environment/human factors for automobile and motorcycle parts, motor and electronics industries.
Equipment Use Conditions:
1. Environmental conditions: temperature 20℃～30℃ relative temperature ≤85%RH.
2. Power supply: AC380V 50HZ three-phase five-wire + protective ground wire. The user is required to configure an air or power switch of corresponding capacity for the equipment at the installation site. And this switch must be independent and dedicated to this equipment.
3. Power capacity: The grounding resistance of the protective ground wire is less than 4Ω.
4. Power: about 12KW (no load)
5. Safety protection device: phase sequence protection, leakage protection, alarm sound prompt.
Technical parameters:
| IPX9K | |
| User site requirements |
1) 6m wide × 4.5m deep × 3m high (users are responsible for the glass room and drainage trough). Please provide the site layout. 2) The user's room needs to have a waterproof system. The floor is paved with high-quality non-slip tiles and can be fixed with bolts. It also has waterproof and anti-penetration effects. The surroundings and top of the room must have waterproof effects. 3) Requirements for drainage troughs around the room: The drainage trough is 200mm wide and 200mm deep. One high and one low inclined. Ensure that the drainage outlet is 200mm deep. Cement board or stainless steel plate is laid on it. 4) When users decorate the room, please reserve the power connection port, water inlet and outlet, gas pipe interface, etc. |
| Test sample | Maximum length, width and height ≥1200x1200x1200mm, maximum sample weight ≥80kg. |
| Number of nozzles | There are 2 nozzles. One is installed on the top (vertical) to spray the top surface of the sample. The other is installed on the bottom (horizontal) to spray the plane around the sample. The spray trajectory is based on the principle of running an S-shaped trajectory. A four-way servo motor design is used to complete the 5-sided water spraying. |
| Four nozzle apertures | 2.34*1.33mm (oval) |
| Nozzle distance | 150-200mm |
| Spray angle | The spray can cover the entire surface of the sample, and the spray angle is perpendicular to the sample surface. |
| Water pressure | 8-10MPA |
| Water temperature | 80℃±5℃ |
| Flow meter | Electronic high pressure flow meter |
| Pressure gauge | High pressure meter |
| Hydraulic pipe | 3m long |
| Flow rate | 15L±1/min |
| Test Method |
(1) The top and five surfaces of the test sample are sprayed with water in turn. (2) When the shell is tested in test a) and test b), the water temperature should be maintained at (80±5)℃. (3) For small enclosures (maximum size ≤ 250 mm): The enclosure should be installed on the test device. Rotation speed: (5±1) r/min. Spray angle: 0°, 30°, 60°, 90°. The test time for each position is 30 seconds. (4) For large enclosures (maximum size ≥ 250 mm): The enclosure should be installed according to the intended use. The entire outer surface of the enclosure will be sprayed. Spray direction: Spray from all directions to cover the entire surface of the enclosure. And the spray angle should be as perpendicular to the spray surface as possible. The distance between the nozzle and the test sample under test conditions is (175±25) mm, at least 3 minutes. |
| Water spraying time |
The basic reference test time is 2 minutes per square meter. The time to complete the entire track can be set. It can be set in about 500 seconds (3.96 square meters). When setting, you can enter the dimensions according to the product's overall dimensions of length, width and height, and the system will automatically complete the test running track for orderly testing. After the test is completed, the nozzle returns to the origin, and the device gives an audible and visual prompt. |
| High-pressure water pump | Italian WOKE brand |
| Rack moving stroke | 2 meters, one meter on each side |
| Nozzle working mode | 175±25mm (adjustable). Equipped with electric nozzle mobile frame. The nozzle can be moved forward, backward, left, right, up and down, and the nozzle angle can be rotated. |
| Constant temperature water tank | An independent constant temperature water tank of about 500L. It can meet the continuous water spraying time of about 30 minutes. |
| Turntable system | Length 1500x width 1500x height 500mm. Square grid-shaped stainless steel, with epoxy board table top on the surface (insulation and anti-corrosion). Load-bearing ≥80kg |
| This rain test chamber is made of high-quality materials and processed by the most advanced processing equipment in China. The outer shell is made of stainless steel or spray-coated, which is simple, beautiful and flat. The color matching is coordinated, the arc design, and the lines are smooth and natural. The inner tank is made of imported high-quality stainless steel plates. The sample racks and other accessories in the room are made of stainless steel or copper. The design is reasonable and durable. The equipment meets national standards and is more practical and easier to control on the basis of stable performance in all aspects. It consists of a test bench, a water storage tank, a control box, a product dehydration buffer zone and a spray system. |
|
Spray system: It is composed of Italian high-temperature and high-pressure water pump, high-temperature and high-pressure water pressure gauge, high-temperature and high-pressure solenoid valve, and high-temperature and high-pressure hydraulic pipe. Self-designed diverter. Water tank: There are 3 sets of heating pipes inside the water tank for heating the water in the water tank. There is an over-temperature protector function inside the water tank. If the water tank temperature exceeds the set temperature when the equipment is running, there will be an alarm prompt. |
| Control mode: independent control cabinet; touch screen + program automatic control (electronic flow meter/electronic pressure gauge display and control). |
| Electrical control accessories: Select internationally renowned brands such as Chint, Omron, and Shiyan. |
| Speed control dial: Gear motor, stable speed regulation. |
| Flow meter: Electronic flow meter. Electronic pressure gauge (pressure transmitter), adjustable and displayable pressure. |
| Communication interface: Equipped with USB interface to download data. RS232/RS485 communication port can be connected to the host computer for remote monitoring, connected to the computer for remote control and data upload. |
Video
Video
Video
Video
Video
|
|
| MOQ: | 1 |
| Price: | Customized |
| Standard Packaging: | Plywood Case |
| Delivery Period: | 30 Days |
| Payment Method: | T/T |
| Supply Capacity: | 10 Sets Per Month |
Open-Type IPX9K High Pressure Water Resistance Test System Ingress Protection Testing
Product information:
The main specimens of this equipment: passenger cars, buses, lamps, motorcycles and other vehicles and their parts.
This equipment can simulate the cleaning process conditions of high pressure/steam jet cleaning to test the physical and other related properties of the specimens.
After the test, it can be judged whether the performance of the product meets the requirements. It is convenient for product design, improvement, verification and factory inspection.
This equipment complies with IEC60529, DIN40050-9, ISO20653 and other standards.
The test function (IPX9K) is used for the inspection of electrical products with enclosure protection level IEC (IP supplement code enhanced test). It is manufactured according to the relevant specifications in the DIN40050 standard. This waterproof tester can provide test conditions simulating natural environment/human factors for automobile and motorcycle parts, motor and electronics industries.
Equipment Use Conditions:
1. Environmental conditions: temperature 20℃～30℃ relative temperature ≤85%RH.
2. Power supply: AC380V 50HZ three-phase five-wire + protective ground wire. The user is required to configure an air or power switch of corresponding capacity for the equipment at the installation site. And this switch must be independent and dedicated to this equipment.
3. Power capacity: The grounding resistance of the protective ground wire is less than 4Ω.
4. Power: about 12KW (no load)
5. Safety protection device: phase sequence protection, leakage protection, alarm sound prompt.
Technical parameters:
| IPX9K | |
| User site requirements |
1) 6m wide × 4.5m deep × 3m high (users are responsible for the glass room and drainage trough). Please provide the site layout. 2) The user's room needs to have a waterproof system. The floor is paved with high-quality non-slip tiles and can be fixed with bolts. It also has waterproof and anti-penetration effects. The surroundings and top of the room must have waterproof effects. 3) Requirements for drainage troughs around the room: The drainage trough is 200mm wide and 200mm deep. One high and one low inclined. Ensure that the drainage outlet is 200mm deep. Cement board or stainless steel plate is laid on it. 4) When users decorate the room, please reserve the power connection port, water inlet and outlet, gas pipe interface, etc. |
| Test sample | Maximum length, width and height ≥1200x1200x1200mm, maximum sample weight ≥80kg. |
| Number of nozzles | There are 2 nozzles. One is installed on the top (vertical) to spray the top surface of the sample. The other is installed on the bottom (horizontal) to spray the plane around the sample. The spray trajectory is based on the principle of running an S-shaped trajectory. A four-way servo motor design is used to complete the 5-sided water spraying. |
| Four nozzle apertures | 2.34*1.33mm (oval) |
| Nozzle distance | 150-200mm |
| Spray angle | The spray can cover the entire surface of the sample, and the spray angle is perpendicular to the sample surface. |
| Water pressure | 8-10MPA |
| Water temperature | 80℃±5℃ |
| Flow meter | Electronic high pressure flow meter |
| Pressure gauge | High pressure meter |
| Hydraulic pipe | 3m long |
| Flow rate | 15L±1/min |
| Test Method |
(1) The top and five surfaces of the test sample are sprayed with water in turn. (2) When the shell is tested in test a) and test b), the water temperature should be maintained at (80±5)℃. (3) For small enclosures (maximum size ≤ 250 mm): The enclosure should be installed on the test device. Rotation speed: (5±1) r/min. Spray angle: 0°, 30°, 60°, 90°. The test time for each position is 30 seconds. (4) For large enclosures (maximum size ≥ 250 mm): The enclosure should be installed according to the intended use. The entire outer surface of the enclosure will be sprayed. Spray direction: Spray from all directions to cover the entire surface of the enclosure. And the spray angle should be as perpendicular to the spray surface as possible. The distance between the nozzle and the test sample under test conditions is (175±25) mm, at least 3 minutes. |
| Water spraying time |
The basic reference test time is 2 minutes per square meter. The time to complete the entire track can be set. It can be set in about 500 seconds (3.96 square meters). When setting, you can enter the dimensions according to the product's overall dimensions of length, width and height, and the system will automatically complete the test running track for orderly testing. After the test is completed, the nozzle returns to the origin, and the device gives an audible and visual prompt. |
| High-pressure water pump | Italian WOKE brand |
| Rack moving stroke | 2 meters, one meter on each side |
| Nozzle working mode | 175±25mm (adjustable). Equipped with electric nozzle mobile frame. The nozzle can be moved forward, backward, left, right, up and down, and the nozzle angle can be rotated. |
| Constant temperature water tank | An independent constant temperature water tank of about 500L. It can meet the continuous water spraying time of about 30 minutes. |
| Turntable system | Length 1500x width 1500x height 500mm. Square grid-shaped stainless steel, with epoxy board table top on the surface (insulation and anti-corrosion). Load-bearing ≥80kg |
| This rain test chamber is made of high-quality materials and processed by the most advanced processing equipment in China. The outer shell is made of stainless steel or spray-coated, which is simple, beautiful and flat. The color matching is coordinated, the arc design, and the lines are smooth and natural. The inner tank is made of imported high-quality stainless steel plates. The sample racks and other accessories in the room are made of stainless steel or copper. The design is reasonable and durable. The equipment meets national standards and is more practical and easier to control on the basis of stable performance in all aspects. It consists of a test bench, a water storage tank, a control box, a product dehydration buffer zone and a spray system. |
|
Spray system: It is composed of Italian high-temperature and high-pressure water pump, high-temperature and high-pressure water pressure gauge, high-temperature and high-pressure solenoid valve, and high-temperature and high-pressure hydraulic pipe. Self-designed diverter. Water tank: There are 3 sets of heating pipes inside the water tank for heating the water in the water tank. There is an over-temperature protector function inside the water tank. If the water tank temperature exceeds the set temperature when the equipment is running, there will be an alarm prompt. |
| Control mode: independent control cabinet; touch screen + program automatic control (electronic flow meter/electronic pressure gauge display and control). |
| Electrical control accessories: Select internationally renowned brands such as Chint, Omron, and Shiyan. |
| Speed control dial: Gear motor, stable speed regulation. |
| Flow meter: Electronic flow meter. Electronic pressure gauge (pressure transmitter), adjustable and displayable pressure. |
| Communication interface: Equipped with USB interface to download data. RS232/RS485 communication port can be connected to the host computer for remote monitoring, connected to the computer for remote control and data upload. |
